SquareCandle Molds
Shopping Information Link
About Us Link
Support Link
Core Page Link
Index Link
Candle Safety
Burning Tips
Decorating with Candles
Candle History
Exit and Links

SHAMROCK Candle MOLDS

  • Durable Metal Molds - last a very long time with reasonable care.
  • All include: wick holder bar, wick retainer screw, mold sealer, 3 feet of wick, and instructions.
  • Made with seam in corner for minimal trimming / polishing.
  • Usage Tips:
    1. Do not drop, pry, scratch or dent.
    2. Placing in a water bath improves finish on candles.
    3. Dry thoroughly after use to prevent rusting.
    4. Spray with silicone before storing to prevent rusting.
    5. Store in sealed container or upside down to keep out dust.
    6. If candle gets stuck in mold, place in freezer for a few minutes. If it still won't come out, place it in hot water (this ruins finish on candle, and should be considered a last resort). Never try to pry or carve stuck wax from mold - this will almost always ruin the mold.
    7. Molds may have sharp edges - handle with care.
WIDTH HEIGHT
3 1/2" 2"

This page is now available on our new and improved web site.

Click Here for pricing and ordering Shamrock Molds on our new site.

Copyright © 1997 - 2003 Bob Sherman
http://www.craftcave.com/candle/canhome.htm